Ecolite LFP12.8V 80Ah LiFePO4 Starter Battery 1200CCA High Cranking Power Lightweight Drop-in Replacement

Product Overview
The Ecolite LFP12.8V 80Ah is a high-performance lithium iron phosphate (LiFePO4) starter battery engineered specifically to replace traditional lead-acid starting batteries in vehicles, boats, and equipment. Delivering 1200CCA cold cranking amps and 1200A pulse discharge current, it provides instant, reliable starting power even in cold conditions—while weighing less than half of a comparable lead-acid battery. Designed for the rigorous demands of engine starting, this battery combines high burst current, fast recharge capability, and exceptional cycle life in a maintenance-free, drop-in compatible package.

Engineered for Reliable Engine Starting
Unlike deep-cycle batteries, this starter battery is optimized to deliver massive current in short bursts. With 1200CCA (tested per DY-2015 standard) and pulse discharge up to 1200A (≤1s), it cranks gasoline and diesel engines with authority—even at -20°C. The high 30C discharge rate ensures your vehicle starts on the first try, eliminating the voltage sag and sluggish performance common with aged or cold lead-acid batteries.

Fast Recharge Between Starts
Supporting a maximum charge current of 100A, the battery recharges quickly via the vehicle's alternator, reaching full capacity in approximately one hour. This ensures the battery is always ready for the next start cycle, even after short trips or repeated cranking attempts.

Long Service Life Reduces Replacement Frequency
Rated for over 2000 cycles at 80% depth of discharge, this LiFePO4 starter battery lasts 5–7 years of typical use—significantly longer than lead-acid batteries (typically 300–500 cycles). This longevity translates to fewer replacements, lower long-term costs, and reduced downtime for fleets and frequent drivers.

Lightweight for Improved Performance
Weighing just 11.5kg—less than half the weight of a comparable lead-acid starter battery—this battery reduces overall vehicle weight, improving fuel efficiency and handling. Its compact dimensions (306×174×200/220mm) allow direct drop-in replacement in most standard battery trays without modification.

Built to Withstand Harsh Environments
Housed in an impact-resistant ABS enclosure with IP65 protection, the battery resists dust, moisture, vibration, and salt spray—making it suitable for underhood installations, marine engine compartments, and off-road vehicles. The sealed, maintenance-free design eliminates acid leaks and terminal corrosion.