100kWh All-in-One LiFePO4 Energy Storage System 512V 100kW Inverter Pure Sine Wave Hybrid Grid

100kWh All-in-One LiFePO4 Energy Storage System

EC-AIO100 — Battery, Inverter & Smart Control in One Cabinet

Imagine one cabinet that replaces the usual tangle of batteries, inverter, meter and control boxes. That is the idea behind the EC-AIO100. It is a complete energy storage system in a single floor-standing unit - the battery bank, a 100kW hybrid inverter, the BMS and the energy manager all live inside one clean enclosure.

You connect solar on the DC side, the grid on the AC side, and the system takes over: charging from the sun, selling nothing cheaply, and keeping your home or business running when the grid disappears.

What Is In the Box

• 512V LiFePO4 battery bank, 100kWh usable energy
• 100kW hybrid inverter with pure sine wave output
• Smart BMS with cell balancing and full protection
• EMS controller with WiFi and mobile APP
• 7-inch touch screen for local monitoring
• Wall-mount bracket, cables and commissioning kit

Why Families and Small Businesses Choose It

Installation is a one-day job for a qualified electrician, because there is nothing to integrate - the inverter and battery talk to each other out of the box. The pure sine wave output is gentle on sensitive appliances like heat pumps, medical devices and audio equipment. And because the system learns your tariff schedule, it quietly charges at night rates and powers your loads during peak rates without you lifting a finger.

Technical Data

Smart Energy Management

The free mobile APP shows your solar production, battery level, home consumption and grid flow on one screen. You can switch modes with a tap: economy mode for maximum savings, backup mode to reserve energy for outages, or eco mode to maximize solar self-consumption. The EMS also accepts remote firmware updates, so the system improves over time.

Installation in Five Steps

1) Place the cabinet on a level floor with 500mm clearance. 2) Connect the DC solar input. 3) Connect the AC grid and load circuits. 4) Power on and follow the touch screen setup wizard. 5) Pair the APP and let the system run its self-test. Most installations finish in a single working day.

Warranty & Support

Five years of coverage with an optional extension to ten. Our support line answers in your time zone, and the system logs diagnostics automatically so most issues are solved remotely before they affect you.

Safety You Can Rely On

Every layer of the EC-AIO100 is designed around household safety. The LiFePO4 cells used here do not release oxygen when overheated, which eliminates the runaway chain reaction seen in other chemistries. The BMS monitors each cell group for voltage, current and temperature, and can disconnect the battery in under one millisecond if any value leaves its safety window. The cabinet itself is fire-retardant, with thermal fuses at module level and an IP55 enclosure that keeps dust and water spray away from the electronics.

What Arrives at Your Door

• EC-AIO100 main cabinet, fully assembled and tested
• DC solar cables (2 pairs) and AC grid cable
• CT clamps and meter (optional)
• Wall-mount and floor-fixing hardware
• Quick start guide and full user manual
• Factory test certificate and warranty card

Common Questions

Do I need a separate inverter? No, the 100kW inverter is built in. Can it power a three-phase house? Yes, the AC side supports three-phase output. What happens during a power cut? The system isolates from the grid and supplies backup power within 20 ms. How do updates work? Firmware updates are downloaded by the EMS and applied automatically at night. Is professional installation required? We strongly recommend a certified electrician; remote commissioning support is included.

Ready to cut your energy bill? Send us your monthly consumption and we will size the right configuration for you.